BAS Expansion Joints (NZ) Buildings / Bridges / Carparks
Search the site:
  • Home
  • Information
    • When to use one
    • What to consider
    • Qualities of seismic expansion joints
    • Common issues
    • Specify our products
    • Approved Applicators >
      • BAS Approved Aplicators
  • Products
    • Interior Floor Joints >
      • WABO®Allure
      • WABO®FastFloor
      • WABO®SeismicFloor
      • WABO®SeismicPan
      • WABO®TwinSeam
    • Interior Wall and Ceiling Joints >
      • WABO®CorridorWrap
      • WABO®SeismicCover - Interior
      • WABO®Contour II
      • WABO®SeisMaxPlus
      • WABO®TwinSeam
      • WABO®WeatherSeam - Interior
      • WABO®FastWall
      • WABO®QuakeWall
    • Exterior Roofing Joints >
      • WABO®RoofCover
      • WABO®Flash
    • Exterior Wall Joints >
      • WABO®SeismicCover - Exterior
      • WABO®SeismicWeatherSeal
      • WABO®WeatherSeam - Exterior
      • WABO®WeatherSeal II - Exterior
      • WABO®QuakeWall
    • Fire Barrier Joints >
      • WABO®ThermoShield
      • WABO®FireFlex
      • WABO®FlameGuard II
      • WABO®FireShield
    • Parking and Open Air Structures >
      • WABO®Air Inflated Joint System
      • WABO®CompressionSeal
      • WABO®Crete Membrane
      • WABO®XPE Seal
      • WABO®GutterFlex
      • WABO®SafetyFlex
      • WABO®Seismic SafetyFlex
      • WABO®SeismicSpan
      • WABO®ElastoFlex (Parking)
      • WABO®WaterTite
      • WABO®HSeal
      • WABO®Crete StripSeal (Parking)
    • Bridge and Highway >
      • BAS®Crete EC
      • BAS®Evazite UV
      • BAS®Long-Run System
      • Modular Expansion Joint Systems
      • TechStar Bridge Bearings
      • WABO®Crete II (Elastomeric Concrete)
      • WABO®Crete StripSeal
      • WABO®StripSeal (Bridge)
      • WABO®XPE Seal
    • Base Isolation Bearings
    • Construction Chemicals
  • Contact Us
  • News and Industry

BAS®Crete EC - Elastomeric Concrete

Picture
BRAND NEW TECHNOLOGY!

​BAS®Crete EC is supplied in kit form as 100% solids, self-leveling, three component, modified urethane system developed for use with specially blended aggregates. BAS®Crete EC is primarily used as a nosing/header material. BAS®Crete EC has the unique ability to absorb energy from impact (Dynamic) loads and disperse this energy throughout the header material, reducing cracking and spalling. It has excellent adhesion to asphalt, concrete, and steel surfaces. For application at a minimum of 4.5°C ambient
and surface temperatures.​

RECOMMENDED FOR:
  • As an expansion joint header/nosing for various expansion joint systems (Bridges / Carparks)
  • Spall repair of existing joint headers/nosing applications.
  • Bridges / Roadways / Motorways / Highways
  • Airport aprons / tarmac areas
  • Commercial Structures
FEATURES Include:
  • 3-Component Kit – Pre-measured ratios allow for easy mixing in the field. No proportioning required
  • Large yield per Kit - means less mixing onsite required, improving your projects QA.
  • New easy mix technology – designed to make onsite mixing easier on both equipment and labour
  • Fast cure/set time – Allows for quick return to service in as little as 2 hours after placement
  • Extended pot life – allows for greater time to place without compromising final set up time.
  • Absorbs traffic impact loads
  • Toughness – It has tremendous physical properties allowing for deflection under load without destroying the matrix
Picture
Picture

Call 0800 SPAN-IT for a system demonstration


Download Technical Information

Datasheet
Installation Procedure
BAS®Crete Usage Calculator

Ph 0800 SPAN-IT

Picture

"Your local joint dealer!"